4.5A 40V TB6600 42/57 Driver Board Controller Stepping Module For Stepper Motor

Features:
PWM chopper-type bipolar stepping motor driver IC
TB6600HQ / HG is a single-chip PWM bipolar sinusoidal chopper type stepper motor micro step driver.
Can control 2-phase stepper motor in forward and reverse rotation
With a 1-2, W1 -2 phase 2W1 -2 phase, 4W1 -2-phase excitation mode.
Just a clock signal can drive two-phase bipolar stepper motor to achieve low vibration, high efficiency work.
Single-chip bipolar sinusoidal micro step motor driver
5 kinds of sub-modes can be selected (1/1, 1/2, 1/4, 1/8, 1/16 step)
With reset and enable pins, With standby function
Break the traditional single-supply operation
Built-in thermal protection (TSD) circuit, Built-in voltage protection (UVLO) circuit, Built-in over-current detection (ISD) circuit

Specifications:
Voltage: 40V
Current:4.5A
Process: BiCD 0.13 nm Process
Withstand voltage: 50V
ON resistance (upper + lower) = 0.4 Ω
CW/CCW: support
Output current: IOUT = 5.0A (peak within 100ms)
Rated output: IOUT = 4.5 A

Package: HZIP25 - 1.00F
Input pull-down resistor: 100 KΩ
Current output alarm pin: Ialert = 1mA
Monitoring output pin (MO): Imo = 1mA
Size: 10.3*6*3.6cm/4.06*2.36*1.42in
Weight: 115g

Package includes:
1 x stepper motor driver